Silberra ULTIMA160 /135-36 B&W Film
- 35 mm
Silberra ULTIMA160 is panchromatic negative black and white photo film with ISO value of 160. Superfine grain, wide tonal range, perfect sharpness and high contrast are typical for Silberra ULTIMA160 film. Silberra ULTIMA series distinctive advantage is low thickness of the substrate. With 0.8mm thickness this film allows easier hybrid processing: with the same light source power there are more details revealed in the negative.
Here are the main features of Silberra ULTIMA series:
1) Low noise, low fog level and extremely fine grain are the special features of emulsion used for Silberra ULTIMA films;
2) Silberra ULTIMA films were derived from Agfa films for surveillance, by widening the dynamic range, lowering contrast and saving several specials, which include:
- extremely high resolution and ideal sharpness of the image;
- ability to provide superior detail level through the whole tonal range;
- higher sensitivity for near-IR spectrum of light, which not only provides you near IR-effects when shooting landscapes, but offers you higher detalization in twilights or while shooting the scenes with insufficient light level;
3) The emulsion is coated upon clear polyester base which offers ultimate stability of the material and perfect optical properties; thickness of the substrate is 0.1 mm and it has excellent antihalo layer on the outer side to grant you an excellent sharpness of the image;
4) Silberra PAN films have special anti-curling layer, which makes drying much easier (there is no need in additional weights or clips on the bottom of the stripe when drying: the film won't curl);
5) Special formulae of the polyester base and protective layers provide scratch resistance, prevent water traces and offer in-built anti-static properties, which makes any Silberra PAN film very convenient for hybrid and classic processing;
Silberra ULTIMA films are perfect for use in street photography, portrait photography, landscape and architectural photography. Special features of 2-layer emulsion make this film ideal to use at dusk/dawn, in winter and at complicated lighting ambience.
Developing process (depending on the specific developer) can infuse into final image such features as adamant gloss within bright areas accompanied by highly detailed shadows, or make the final image reasonably even along the whole light spectrum.
Silberra ULTIMA films are optimal for use in natural light. Using the film in artificial light is subject to preliminary tests due to high sensitivity in red and near-IR light spectrum. We recommend shooting several frames and processing those prior to any professional photo sessions in studios. Choosing the color temperature of artificial light sources and their power is vital to obtain predictably perfect results.
Silberra ULTIMA160 is able to provide excellent image at cloudy weather, in fog and at dusk; the final image will have perfect shadow details preserving the overall high resolution (210 lines/mm at 1000:1 TOC contrast).
Officially the exposure range for Silberra ULTIMA160 – 100, 160 and 250ISO. Lowering the sensitivity below 100 may cause loss of reasonable contrast, while increasing the sensitivity over 250 could increase the graininess and noise level.
Using yellow filters provide increased contrast and lowers the overall sensitivity of emulsion. Using the filters you shall bear in mind the next exposition multipliers (besides the coefficient of the filter itself):
Yellow filter - 1.5;
Dark yellow/ orange filter – 1.8;
Red filter – 3 or 4 depending on the wave length of the filter;
Archival capacity of Silberra ULTIMA160 is not confirmed practically; the guaranteed archival storage period thus is stated as over 10 years without image quality loss. Silberra recomends archival storage using special archival file sleevers (triacetate, paper of pergament) in cold (below 20 degrees of Celcium), dry and cool place.
|Developer||Dilution||Temperature, ° C||Time, minutes||Comments|
|Silberra S-76||1+0||20||14||High detail level, reasonable contrast along all tonal range|
|Kodak D-76||1+2||20||22||Low contrast, reasonable detail level, balanced tone range|
|Kodak D-76||1+0||20||14||Medium contrast, high detail level|
|Kodak D-76||1+1||20||19||Medium contrast, high detail level|
|Silberra Ascorol||1+29||22||10.5||Medium contrast, high detail level, may infuse the brilliance effect in lights|
|Silberra Ascorol||1+29||20||14||Medium contrast, high detail level, may infuse the brilliance effect in lights|
|Silberra Pyro-HD||1+1+100||22||17||Reasonable equalized contrast, high details level withtin the whole tonal range|
|Silberra RDN-LQ||stock||20||17||Reasonable equalized contrast, high details level withtin the whole tonal range|
|Silberra Pyro-HD||1+1+100||20||21||Reasonable equalized contrast, high details level withtin the whole tonal range|
|PyrocatHD||1+1+100||20||21||Equalized contrast, high details level along the whole tonal range|